Products2 Easy2 Easy User Manual

Easy 2 User Manual



2 Easy Vibration Platform


          User Manual


Contents            1

Introduction                                                                 1

Parts                                                                       2

Console                                                                       3

Button Description    and Operation                                            4-7

Installation                                                                  8-9

Safety Cautions                                                         10-11        

Product Maintenance                                                      12

Specification                                                                 13



Thank you for purchasing the easyVitality 2 Easy Vibration Platform. Please read the user manual thoroughly before you begin operating the machine, this user manual should be kept available for future reference after you have read it thorough.


Our company has the absolute right to alter the picture, and material color without prior notice. Design, picture and material color seen in this manual is solely for illustration purpose.


To register your Warranty go to:

                           Under “Products” tab is “Register Product”

                           Fill it out and hit send

Use your platform every day for best results.


1. Console                            2. Console Bracket

3. Screw(M6X16)                    4. Handrail

5. Screw(M6X16)                    6. Extension Tube

7. Lock Catch                          8. Support Tube

9. M8 Plastic Head Screw               10. Main machine

11. Adjustable Feet Cushion



  1. Program                            11.  Oscillation Speed +

  2. BMI                                12.  Oscillation Speed -

  3. Mode (Manual,P1, P2, P3)            13.  BMI Sensor

  4. Time (+)

  5. Time (-)

  6. LCD Window

  7. Start/Stop button

  1.    Vibration Speed +

10.    Vibration Speed -

Button Description

Button Name



User-defined program


Body Mass Index Measurement


Mode Selection


Time up, BMI data input


Time down, BMI data input


Startup, shutdown, start running, stop running, to confirm \ return.


Left:  Oscillation speed up

Right: Vibration speed up


Left:  Oscillation speed down

Right: Vibration speed down


Button Operation:

  1. Time Adjustment:

  2. Press TIME +/ TIME – buttonto adjust the total running time, the default time is 10 minutes.

Note: The default time can be customized.

  1. Startup\Shutdown:

Press the START/STOP button after adjusting time, the default oscillation/vibration speed is 1. Press left SPEED+/- button to adjust oscillation speed, the maximum speed is 60, the oscillation movement is off when the speed is 0. Press right SPEED+/- button to adjust vibration speed, the maximum speed is 60, the vibration movement is off when the speed is 0. The user can press START/STOP button to stop the movement or hold on the START/STOP button more than three seconds to turn off the control system. (the power is still on, only soft-off control system), press the START/STOP button again, the system will be on.

   Note: a)After press the START/STOP button, only the speed buttons are active.                b) The maximum speed level can be customized.

  1. Mode Selection:

In the standby state, press MODE button, the window will show ”P1”, continue to press this button, it will show “P2””P3””U1””U2””U3””MANUAL”

“P1””P2””P3” are automatic program

“U1””U2””U3” are user defined program

“MANUAL” program: the user can adjust the speed

After select the program, press START/STOP button, the machine will work on the corresponding program.

In the MANUAL program, press the START/STOP button and adjust the speed bypressing SPEED+/- buttons.

Note: The default startup program is “MANUAL”program.

  1. Auto Program:

P1 Oscillation:  30 34 38 42 46 50 54 58 54 50 46 42 38 34 30 26 22 18 14 10 6 2 6 10 18 22 26

Vibration:   30 26 22 18 14 10 6 2 6 10 14 18 22 26 30 34 38 42 46 50 54 58 54 50 46 42 38 34

Time Interval: 5 seconds

P2: Oscillation: 2 40

Vibration:  40 2

Time Interval: 5 seconds

P3: Oscillation: 10 15 20 25 30 35 40 45 50 55 60 55 50 45 40 35 30 25 20 15 10 5

Vibration: Stop

Oscillation: Stop

Vibration: 5 10 15 20 25 30 35 40 45 50 55 60 55 50 45 40 35 30 25 20 15 10 5

Time Interval: 2 seconds

User-defined Program:

There are 12 settings of each of U1, U2 and U3 programs:

  1. To begin programming, press MODE button to select “U1”, then press PROG button, ”U1” is flashing, It’s the “U1” programming mode, there is a bar apprear above both (Oscillation icon) and (Spiral Vibration icon), it starts first setting.

  2. Press the left SPEED+/- button to set oscillation speed, for example choose 5-speed, the left of screen display 05, press the right SPEED+/- buttonto set vibration speed, for example choose 8-speed, the right of screen display 08.

  3. Press the TIME+/- button to set the time. For example, choose 4 seconds and the screen displays TIME 04.

  4. Press PROG buttonagain. The screen will show , it has come to second setting of “U1” programming, repeat this process for each of 12 settings.

“U1” will stop flashing when all the setting are finished.

  1. If revise the program, press PROG button to the setting you want revising and press SPEED+/- button on the left or right to adjust it. Press START/STOP button to run the defined program.

Note: a) The programming of “U2””U3” are the same process of “U1”.

b) After one period, the program will repeat automatically till the total system time is finished, then it will stop itself.

c) You can press the START/STOP button to stop the working anytime,the system will be back to the “MANUAL” mode, you can press the MODE button to choose the program at this time and press START/STOP button to run it.

d) In the programming, you can press START/STOP button anytime to stop it.

e) During the running of “U1””U2”U3”, only START/STOP button is active.

  1. BMI Function:

On the standby state, press BMI button, the screen showBMI,flash,is male,is female,

PressTIME+/- button to choose your gender and pressBMI buttonto confirm. Then the screen will show AGE and there are three number flash, pressTIME+/- button to enter your age and press BMI buttonto confirm. Then the screen will showkg W and there are three number flash, pressTIME+/- button to enter your weight and pressBMI button to confirm. Then the screen will show cm H and there are three number flash, pressTIME+/- button to enter your height and pressBMI button to confirm. Then the screen will show ,put your hands on the two BMI sensor  ,the system will show your measured BMI.



  1. Take out the support tube(8) and main base(10) from

packing carton. Straighten up the support tube (8).

  1. Lock them with M8 Plastic Head Screw(9).

3 . Rotate the lock catch (7) 90 degrees clockwise to

make the extension tube (6)neck loosen.


 Pull up the extension tube (6) and make sure that the

copper bead bounces into fixing hole.

  1. Rotate the lock catch (7) 90 degrees anticlockwise to

make the extension tube (6) locking.

Safety Cautions

Please follow the warnings said below strictly. This will prevent to damage of your machine or any harm to your body or any lose which caused by any improper use of the machine.

When use the machine, please comply to the instruction to operate.


Please make sure that power plug does not get pressed by side portion of the machine.

□The power plug might get damaged leading to electrocution or fire.

Use the power outlet for the machine only.

□Connecting multiple products to an outlet might lead to fire. Fuse might get damaged or the product may not function.

Please remove dirt on the power plug using dry clothes

□Dirt and abnormal connection might lead to fire.

Leave 20cm of gap from the wall when installing the machine.

□Good air circulations will prevent the product from malfunctioning.

Please install the product in solid and horizontal ground.

□Noise and vibration might be created when the ground level is not horizontal. Please adjust the machine when the ground is not even.

After using the machine, please press the stop button. Step down from the machine when the machine stops completely.

□Stepping down during run state might lead to physical injuries.

Please unplug the power plug when the product is not in use.

□This will prevent unnecessary wastage of electricity and may prevent fire.

Please do not run on top of the machine when the product is in use.

□The product might get damaged.

Old people and children should be accompanied by guardians in using the machine.

□Physical injuries might be caused.

The machine can not take load of more than two people.

□The machine might get damaged.

Before cleaning, remove any water particles using dry clothes to prevent water particles entering into the machine.

□Water particles will weaken the insulation will lead to electric leakage and fire and easy to rot the machine.

Please clean the surface of the machine using proper cleaners suitable for the material.

□Please wipe the surface with dry clothes when wet towel had been used to clean the surface.

Please clean and dry the machine before storing the machine for a long time.

□Please clean the surface with dry clothes before storing to prevent corrosion.

Please do not unplug and plug the power plug with wet hands.

□It might lead to electrocution

Do not band power cord and avoid power cord from getting damaged by heavy items.

□When damaged, it might be lead to fire.

Please do not use damaged power cord or plug.

□It might lead to fire or electrocution.

Do not install the machine in wet place or near to water.

□It might lead to electric leakage, The machine may get corroded when used in wet place or place nearby water.

Please do not stock items on top of the plate.

□It might lead to electrocution or fire and may damage the electric circuit.

Do not sprinkle water or clean the machine using gasoline, benzene, thinner or chlorine.

□There is danger of getting electrocution or catching fire.It also might damage the electronic circuit.

Please remove the power plug before cleaning

□For prevention of electric leakage.

When the machine creates smoke or burning smell, remove the power cord immediately and stop exercising.

□It might lead to fire or electrocution.

Please do not disassemble, repair or modify the machine if you are not professional.

□Non-compliance will lead to product damage or financial damage due to fire or malfunctioning of the machine.


If you are under medical treatment for any of the following symptoms, please consult your doctor before use.


Recently inserted IUD or Metal pins

Recent operative wounds

Pregnant women

Severe migraines

Active cancer


It is advisable to drink 500ml lukewarm water before use in order to eliminate the toxic wastes, drink 3000ml of water daily for a healthier lifestyle, as it can revitalize energy inyour body. Water can benefit your body as follows:                                                                 

  • Helps prevent indigestion

  • Reduce sickness especially in the kidney

  • Enhance metabolism rate

  • Improve blood circulation and prevent heart disease

  • Strengthen your immune system

  • Reduce pressure and stress

  • Prevent fatigue and increase stamina in the body

  • Enhance your skin texture for a freshness look

Product Maintenance

A. How to Store           

  1. Do not store the Vibration Plate

    • Near heat or open flame.

    • Under the direct sunlight for a long period time.

    • Harmful gas and dust, especially humidity.

  2. Keep the Vibration plate

    • Usage temperature: 0 - 35degree.

    • Keeping temperature: 5 - 50degree

    • Humidity: under 40% - 80%

  3. If the vibration plate is not use for a long period time, cover it with a piece of clean cloth to protect it from dust.

  4. Do not store the vibration plate under direct sunlight or at places of high temperature.

  5. Do not coil the wire cord as it may cause malfunction to the machine.

B. Self-Maintenance                           

  1. Before cleaning, ensure that the main switch is turned off and AC plug is removed from the electrical outlet.

  2. Do not use the Vibration Plate too long for the first time.

  3. Switch off power and remove the plug from the socket every time after use.

  4. Do not use this machine in wet areas such bathroom, swimming pool or spa.

  5. Do not use it when there is too much dust, oil, smoke or caustic gas.

  6. Avoid damaging the surface of the Vibration Plate surface with heavy object, by knocking hand, scratching with force.


C. Cleaning

1. Using corrosive cleanser is prohibited. Do not use benzene or thinner to clean or spray insecticide on the machine.


Model Name---------------------------------Two Motor Vibration Plate

Input Voltage --------------------------------220V/50Hz

Oscillation Motor----------------------------200W

Vibration Motor------------------------------200W

Oscillation Amplitude----------------------0-10mm

Oscillation Frequency---------------------5Hz-15Hz

Vibration Amplitude------------------------0-2mm

Vibration Frequency-----------------------15-40Hz

Speed Range--------------------------------1-60 level


Dimensions-----------------------------------720mm (L) X 690mm(W) X330mm (H)

Load Weight---------------------------------120KGS

Net Weight------------------------------------28 KGS

Gross Weight---------------------------------30 KGS

            Thank you for your purchase.


To ensure results make sure you use your new easyVitality vibration platform regularly.


Product registration:  under the Products tab is Register Product.

                   Just file it in and hit send.

easyVitality       it’s easy!  The No Sweat Zone          1-877-914-8282

Rate this item
(0 votes)